Service |
Price |
Person in Charge |
Preparation of MEA with commercial catalysts |
20 BGN/hour |
Dr. Galin Borisov, |
Preparation of carbon dioxide gas-diffusion electrode |
30 BGN/hour |
Dr. Galin Borisov, |
Preparation of a gas-diffusion electrode with non-carbon sublayer |
50 BGN/hour |
Dr. Galin Borisov, |
Preparation of MEA |
50 BGN/hour |
Dr. Galin Borisov, |
Service |
Price |
Person in Charge |
Estimation of proton and anion (OH) conductivity of different materials at humidity and temperature; Size of the sample: 15 x 40 mm. Price of a single measurement under specific conditions (humidity and temperature): |
50 BGN/ measurement |
Assoc. Prof. Veselin Sinigersky; |
Characterization of catalyst in liquid three electrode cell |
10 BGN/hour |
Dr. Galin Borisov, |
Characterization of a catalytic carrier |
10 BGN/hour |
Dr. Galin Borisov, |
Tests for catalyst characterization for anode or cathode response in water electrolyzers respectively |
20 BGN/hour |
Dr. Galin Borisov, |
Characterization of MEA for water electrolysis |
20 BGN/hour |
Dr. Galin Borisov, |
Characterization of MEA for fuel element |
20 BGN/hour |
Dr. Galin Borisov, |
Service |
Price |
Person in Charge |
X-ray diffraction analysis (XRD) |
50 BGN/sample |
Prof. Sasho Vasilev; |
Hg porometry |
100 BGN /sample |
Prof. Sasho Vasilev; |
Scanning Electron Microscopy (SEM) |
100 BGN/sample |
Prof. Sasho Vasilev; |
BET analysis |
50 BGN/sample |
Prof. Sasho Vasilev; |
Pore analysis in capillary flow |
50 BGN/sample |
Prof. Sasho Vasilev; |
Gas permeability |
50 BGN/sample |
Prof. Sasho Vasilev; |
DTA/TG/DSC analysis |
60 BGN/sample |
Prof. Sasho Vasilev; |
X-ray analysis of powders, thin films and solids, liquid sample analysis and thin layer refractometry (crystalline, amorphous or liquid samples). |
50 BGN/sample |
Assoc. Prof. Veselin Sinigersky; |
IR spectra recording (KBr or thin film) |
20 BGN |
Assoc. Prof. Veselin Sinigersky; |
Thermogravimetric analysis - Heating / cooling from 30 ° C to 1000 ° C at rates from 5 ° C / min to 200 ° C / min. Non-isothermal and isothermal mode of operation. |
Under Negotiation , but not less than 50 BGN/hour |
Assoc. Prof. Veselin Sinigersky; |
Determination of ISO tensile properties - including modulus of elasticity, elongation at break and tensile strength |
120BGN/series |
Assoc. Prof. Veselin Sinigersky; |
Determination of bending properties according to ISO 178 - bending strength and bending modulus |
150BGN/series |
Assoc. Prof. Veselin Sinigersky; |
Determination of impact strength |
85 BGN/series |
Assoc. Prof. Veselin Sinigersky; |
Production of series of test bodies |
180 BGN |
Assoc. Prof. Veselin Sinigersky; |
Gas permeability measurement of porous materials with different gases: hydrogen, air, oxygen, nitrogen, argon and gas mixtures, sample size up to φ=45mm. |
18 BGN/ hour |
Dr. Blagoy Bourdin; |